Halyards

Is stretching slowing boatspeed?

Boat speed is determined by a range of factors. Stretched halyards are one of them. Because sail shape is linked to boat speed, your lines are contributing to the speed of your sailboat.

Of course they are designed for the task at hand, but they do suffer over time. Stretched lines mean weak lines. You can easily check them out.

Do the following:

  • Hold a couple of feet in your hand and see whether it falls towards the deck or stays in the air
  • Look at the overall condition of the line, color, ease of flaking

Quick checks

These simply checks can help you determine whether you need to buy more halyards. This could be the key to improved boat speed! Better sail trim, improves boat speed.

Check out that sail shape - beautiful and fast!

Check out that sail shape - beautiful and fast!

Here's the practical advantage

By raising your average boat speed you will benefit. Suppose your out cruising with your family and you've decided to round it off and go back home. In order for the tide to be in your

favor you need that fraction more from the sails. So the sails are set and you've done all you can do with the vang. But the speed does not change! You can't get the sail trim to meet

Catch the tide!

with the prevailing wind and you wont catch that tide either! It's down to the depreciated condition of your halyards. So you motor in, instead. That's a shame when you could have sailed.

Good news

Here's the good news! You may need some of that! West Marine supplies halyards to suit all sailboats, you can browse through below and get the boat speed you deserve!

Want more for your money? West Marine are giving away 10% on orders over £100!



Related Posts

Find out how to rig sailboats

Go to anchor rope

Looking for dock safety halyards

Find out how to splice wire

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Dock Lines

In this case memory is bad

When your leaving or returning to the dock, are your dock lines coiling in the same places? If they are then they have developed a memory. This is a sign of wear and tear. Because the

cord settles in the same place each time you coil, then it's strength is compromised. Quite apart from the signal your docking lines send to other pontoon users, hockling and kinks are the sign to change them.

As the lines are subjected to:

  • UV
  • Temperature change
  • Wind & rain
  • Abrasion by wear and also salt


You want to have cords that stand up to the test.

Nicely coiled, but not kinked

Nicely coiled, but not kinked

How about if you could get cords with the following:

  • Easy coil, no memory design
  • Coated to protect against the harsh environment

Continued development

Advances in the boating world happen all the time. Fibers improve, techniques are honed, providing you with better products. Each and every time.

Get the advantage

Marine West carry a range of pre spliced  lines that suit all docking scenarios. So take advantage of the most popular supplier of boating products, right here on this page today.

Take advantage! West Marine are offering a 10% discount, when you spend over $100!



Related Posts

Find out how to rig sailboats

Go to anchor rope

Find cable tension meter

Find out how to splice wire

Post Footer automatically generated by Add Post Footer Plugin for wordpress.