How To Assemble An Inflatable Boat

As you will see

when you watch the video below, assembling inflatable boats takes a few neat tricks, that you would be wise to take note of. Particularly if your dinghy or sportsboat is new.

Learn from Chuck

However, what becomes evident from Chuck’s informative narrative, is that once the two tubes are semi inflated and the decking or floor has been slotted in place – look out for the time and hassle saving tip! Then most of the work is complete.

Storage

Depending on your storage space availability, will dictate how often you assemble or disassemble your boat. The less space you have, the quicker you will be come at the process!

Filling the tubes

Once you have inflated the hull to 3 PSI, then you can go onto to complete filling the tubes. It’s best to inflate each one partially, then move over to the other. This means the PVC material is not under any undue pressure.

Time for action

Now you have your inflatable boat boat for action! As you can see from the accessories below you can choose to name your boat, apply protection, or buy a protective cover for your dingy too! All in stock from West Marine – right here on this site!

Related posts

Three meter RIBs this way

See how fast this inflatable boat gets on the plane

Post Footer automatically generated by Add Post Footer Plugin for wordpress.